NetBIOS Error Codes

Code Description
0x00 Operation completed successfully.
0x01 Illegal buffer length.
0x03 Invalid Command.
0x05 Command timed out.
0x06 Message Incomplete.
0x08 Illegal local session number.
0x09 No resource available.
0x0A Session closed.
0x0B Command canceled.
0x0D Duplicate name in local name table.
0x0E Name table full.
0x0F Command completed, name has actice session and is now de-registered.
0x11 Local session table full.
0x12 Sesion open rejected.
0x13 Illegal name number.
0x14 Cannot find name called or no answer.
0x15 Name not found or cannot specify "*" or null.
0x16 Name in use on remote NETBIOS interface.
0x17 Name deleted.
0x18 Session ended abnormally.
0x19 Name conflict detected.
0x21 Interface busy.
0x22 Too many commands outstanding.
0x23 Invalid number in MCB_LANA_NUM field.
0x24 Command complete while cancel occurring.
0x26 Command not valid to cancel.
0x4E Ring status-one or more of bits 12,14, or 15 on longer than 60 seconds.
0x4F Ring status-one or more of bits 8 - 11 on.
0xF7 Error on implicit DIR.INITIALIZE.
0xF8 Error on implicit DIR.OPEN.ADAPTER.
0xF9 Adapter support interface internal error.
0xFA Adapter check.
0xFB NETBIOS interface code not loaded in the PC.
0xFC DIR.OPEN.ADAPTER or DLC.OPEN.SAP failed-check parameters.
0xFD Unexpected adapter close.
