###################################

#                                 #

#        ANSI COLOUR TEXT FOR     #

#           FBB 5.15c by          #

#        G6URP and G4NRY 4/95     #

###################################

############################################################################

# Some variables are changed in 5.15, see CHANGES.DOC.  They are :

# $A->%A  $G->%G  $M->%M  $n->%n  $P->%P     Not changed EVERY place..!

############################################################################

############################################################################

# In 5.15b I have reduced all prompts.  I have removed all axtra texts saying

# "..connected station(s)" and replaced them with only the number of connected

# stations before the prompt, like this: (1) LA6CU BBS>

############################################################################

#

# Lines must not exceed 255 characters.

# -------------------------------------

#

# Line-arrangement must NOT be changed !

# Lines (except comment-lines starting with #) must NOT be added or deleted !

#

# What language is this ?

#

English

[0m[1m[32mANSI Colours, by G6URP/G4NRY 4/95. $W

#

# Define answers, Yes and No.

#

Yes

No

#

# Days and months :

#

SunMonTueWedThuFriSat

JnrFbyMchAprMayJunJlyAugSepOctNovDmr

#

# Define directions:  (To be used in QTH-locator server)

North

South

East

West

#

# T_MES: Welcome

#

# Welcome BBS:

#

$U fwd to $O

#

# Welcome EXPERT :

#

[0m[1m[36m$O, $?.$W$WHello $I. Last login [0m[1m[31m$Yz $x-$a$W [0m[1m33$N active messages, New $Z - $L.$W

#

# Welcome non-expert:

#

[0m[1m[36m$O BBS, QTH $c.$W$WHello $I.$WYou last logged in at [0m[1m[31m$Yz on $x-$a.$W [0m[1m[33mThere are $N active messages, the last is $L and $W$Z is the last you have listed.$W [0m[1m[36mToday's Date $d-$a, Time $H GMT.$W

#

# Register your name:

#

[0m[1m [31mType your name using the N-command, like this      : [0m[1m [33mN (your firstname).$W

#

#############################################################################

# New in 5.15: NQ (QTH-loc) is changed to NL.  NQ is now QTH.

# Register your QTH

[0m[1m [31mType your QTH (town/city) with NQ-command, like this : [0m[1m [33mNQ (QTH).$W

#

###############################################################################

#

# Register your HOME-BBS

[0m[1m [31mType your HOME-BBS using the NH-command, like this : [0m[1m [33mNH (HOME-BBS).$W

#

# Register your ZIP-code

[0m[1m [31mType your postcode using the NZ-command, like this : [0m[1m [33mNZ (postcode).$W

#

#

# Welcome to guest:

#

[0m[1m[34m$O BBS, $c.$WYou have only limited access on this port.$W [31mOnly users who have Home BBS as GB7SOL, or temporary visitors$Wto the area will be granted full access. [36m$WPlease send a message to G6URP if you require this.$W

#

# Text sent to non-BBSs on BBS-only port:

#

Sorry, only BBS's allowed on this port.$W

#

# Welcome first time:

#

[0m[32m$WThis is your first contact with this BBS. Please answer$Wthe prompts correctly.$W$W

#

# There are messages for you:

#

[0m[1m[5m[31m$WYou have $0 new message(s). [0m[1m[31mType LN for list, RN to read them$W

#

# There are messages for you that you have read but not killed:

#

[0m[1m[31m$WThere are $0 message(s) for you that you have read but not killed.$WPlease kill them with KM [35m(Type LM for list).$W

#

# Goodbye-text:

#

[0m[1m[32mYou have been connected $: - Computer-time : $.$W73 $I de $O.$W [0m

#

# Answer to !-command: 

#

[0m[1m[37mMulticonnect "server" type F6FBB V$E - Assigned channels:$W$% [32m$W$N active messages - Last message $L - Last listed $Z. [33m$WConnect-time : $: - Computer-time : $.$W

#

# T_QST: Some standard questions and answers :

#

#

# By reading:

#############################################################################

# N and C are new in 5.15

[0m[1m[33mENTER=Continue, A=Abort, N=Next -->

#############################################################################

[0m[1m[31mMake change (Y/N) ?

[0m[1m[32mThank you$W

[0m[1m[31m$WAborted !!$W$W

[0m[1m[31mCreate (Y/N) ? 

[0m[1m[32mEnter number (L=List, F=End) : 

#

# By listing:

[0m[1m[31mENTER=Continue, A=Abort, R/V=Read -> 

#

# T_ERR: Error-messages:

#

[0m[1m[5m[31m*** Error : [0m[1m[31mWrong answer.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mWrong command: $0.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mYou forgot a space after the command.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mOnly numeric values allowed.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mText after callsign is missing.$W 

[0m[1m[5m[31m*** Sorry : [0m[1m[31mNo help available for $0.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mCallsign of addressee is missing.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mCallsign is missing.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mUnknown file.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mCharacter $0 not allowed here.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mMessage #%M does not exist.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mThe file $f does not exist.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mYou cannot kill message #%M.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31m#%M does not exist.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mInvalid port.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mUse CD-command.$W 

##############################################################################

# Changed in 5.15b :

[0m[1m[5m[31m*** Error : [0m[1m[31mThe field $0 is too long.$W

[0m[1m[5m[31m*** Error : [0m[1m[31mAddress for $0 is wrong.$W

[0m[1m[5m[31m*** Sorry, you have already downloaded %dkb this period.

###############################################################################

[0m[1m[5m[31m*** Error : [0m[1m[31mNone !$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mFilename is missing.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mTo-file-name is missing.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mUnknown language.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mImpossible to modify file $f.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mUnknown, or not empty, directory $0.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mDirectory is missing.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mCannot make directory $0.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31m"Path" is missing.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mToo long "path".$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mThat "path" does not exist.$W 

[0m[1m[5m[31m*** Error : [0m[1m[31mCannot make file $f.$W 

[0m[1m[5m[31m*** Sorry, you have timed out, now disconnecting...$W

#

# Texts belonging to different departments

#

# T_MBL: Mailbox

#

#

# Expert-prompt:

[0m[1m[33m$W($*) $O BBS $Hz >$W

#

# Guest-prompt:

[0m[1m[33m$W($*) $O BBS $Hz (B,H,KM,LM,O,RM,S,T,?) >$W

#

# Non-expert prompt:

[0m[1m[33m$W$* connected station(s)$W$U de $O $Hz (? for help, ?H for list of commands) >$W

#

# Misc messages:

#

[0m[1m[31mThere are no such messages (message-choice: $l).$W

[0m[1m[31mThere are no new messages for you.$W

[0m[1m[32mEnter subject for this message to %G (leave blank to cancel) : $W

[0m[1m[32mEnter message text (end with /EX or Ctrl-Z on new line) : $W

[0m[1m[31mMessage #%M killed.$W

#

# Answer to V-command:

[0m[1m[34mSoftware F6FBB V$E - $N active messages - Last message is #$L$W

#

# Misc messages:

[0m[1m[31mPlease enter your first name :

[0m[1m[33mThank you, $I.$W

[0m[1m[32mCallsign  LastConnect #Cnct RPBSXLEMU Lg Name         Password     PRIV-dir.$W

[0m[1m[31mSorry, $V is not available, please leave a message or try later.$W

[0m[1m[32mPlease wait while I page $V.$W

[0m[1m[31mSorry, $V did not answer, please leave a message or try later.$W

[0m[1m[35mOk $I, $V is now at the keyboard:$W

[0m[1m[5m[31mPlease stand by, $V would like to talk to you...$W [0m[1m[35m

[0m[1m[33m$WYou will now have "Expert-status".$W$W

[0m[1m[33m$WYou will now have "Normal-status".$W$W

[0m[1m[33mYou are now in "Server-mode". Type F <return> for BBS-mode again.$W

[0m[1m[33mFile $f has been copied.$W

[0m[1m[31mMessage for %G has been cancelled (message has no title).$W

[0m[1m[33mYou will now have no paging.$W

[0m[1m[33mYou will now have $p lines per page.$W

[0m[1m[31mThis user is now connected.  Editing not allowed.$W

$0 $1 $2 $3 $j $K = $4'$5

#

#

[0m[1m[33m"Base-number" is now $q.  All message-numbers will use this as a base.$W

[0m[1m[33m(B)id, (F)rom, (V)=@BBS, (T)o, T(I)tle, (S)tatus, T(Y)pe, (CR) finished >$W

[0m[1m[33mR,P,B,S,X,L,E,M,U. (On/off).$WN name.  W passwd.  G language no. V priv-dir. H home-BBS. Z postcode. >$W

[0m[1m[31mUnknown callsign $0. Create (Y/N) ?

[0m[1m[5m[31mDelete $0 (Y/N) ?

[0m[1m[33mAvailable languages :$W

[0m[1m[33m($0):$1

[0m[1m[32m$W--- End of message #%M to %G from %P ---$W$W

#

# Answer to $ (message-#)- or FN (message-#)-command:

[0m[1m[31mForward-status of message #$0:$W

#

# Header of message, when reading :

[0m[1m[37mFrom        : %P$WTo          : %G$0$WType/status : $t$s$WDate/time   : $j $K$WBID (MID)   : $R$W

#

# Header of messages, when listing :

#

#############################################################################

# ---------  New in 5.15 TSL  (L is new) and $r  ---

# ---------         D and %r ----------

# Changed a little in 5.15b:

#  

[0m[1m[36m$WMsg#   TSLD  Size To    @ BBS   From   Date/Time Title       (LC-choice: $l)$W

# Contents of each line when listing:

[32m$M $t$s$r%r $n $G$0 $P $i $1$W

#

##############################################################################

[0m[1m[32mMessage #   : %M$WTitle       : $S$W

[0m[1m[32mBid (Mid)   : $R$W$W

[0m[1m[34mMessage sent @

#############################################################################

# Changed in 5.15

[0m[1m[34mRouting (from $0) to $v.$W

#############################################################################

#

# BBS-prompt by reverse-forward and standard forward:

F>$W

>$W

#

# Messages to other station during forward:

NO - Wrong parameter.$W

N - BID$W

OK $W

*** Done$W

#

[0m[1m[33mSize: %n$W

[0m[1m[31mThe system does not have a route to %A. SYSOP will be advised.$W

[0m[1m[33mReply-message sent to %G @$v$W

#

[0m[1m[34mOR: Access to all personal messages in the BBS : $0$W

[0m[1m[34mOM: Receive list of new messages at connect    : $0$W

[0m[1m[31mWhat is your Home BBS (e.g. GB7SOL)?  :

[0m[1m[31mWhat is your postcode (e.g. B93)?     :

[0m[1m[32mHomeBBS: $0      Postcode : $1$W

#############################################################################

# Changed in 5.15

[0m[1m[5m[31mWarning !! [0m[1m[31mWP has no routing to %G$W

###############################################################################

$W$0 held message(s).$W

[0m[1m[33m(A)rchive, (K)ill, (L)ocal, (Q)uit, (R)ead, (V)erbose, (U)nhold ?

#

# T_TRT: Traitement

#

[0m[1m[31m*** Busy - Please wait.$W

[0m[1m[31m*** Busy - Not possible to make contact right now.$W

[0m[1m[31m*** $0 is not connected.$W

[0m[1m[32m$W$B*** Connected to $0 in chat mode (End chat with Ctrl-Z).$W

[0m[1m[31m*** Disconnected.$W

[0m[1m[32m$U de $0 : 

[0m[1m[36m$W($*) $O BBS $Hz >$W

[0m[1m[34m*** Text sent to $0.$W

[0m[1m[31mStop-request from $0. Code : $1$W

[0m[1m[31mStop-request accepted, no connection.$W

[0m[1m[31mReset-request accepted, performing initialisation.$W

#############################################################################

# Changed in 5.15b

[0m[1m[33mENTER=continue, A=Abort -->

###############################################################################

Interrupt request rejected.$W

[0m[1m[33mYou are in BBS mode. Type 'F <return>' for server mode.$W

#

# T_MEN: Server-menu

#

[0m[1m[34m$W($*) SERVER-MENU (C,D,N,Q,T,F,B. ?=help) >

#

# The next 2 lines are sent together for sysop, only the last one is sent for

# other users !

#

$W 

[0m[1m[34m$W(C) Connections-Stat.$W(D) Docs.$W(Q) Qth-Locator.$W(N) User-data.$W(T) Satellites.$W(F) Return to BBS-mode.$W(B) Disconnect.$W$WFor help, type ? (command).$W$WSERVER-MENU (C,D,N,Q,T,F,B. ?=help) >

#

# T_STA: Statistics-module

#

[0m[1m[32m$W($*) CONNECTIONS-STAT. (G,H,I,J,L,O,F,B. ?=help) >

#

# The next 2 lines are sent together for sysop, only the last one is sent for

# other users !

#

$W

[0m[1m[32m$W(G) General$W(H) Use pr. hour$W(I) List callsigns$W(J) Use pr. day$W(L) Details$W(O) Percentages$W(F) Return to server-menu$W(B) Disconnect$W$WFor detailed help, type ?(letter).$W$WCONNECTIONS-STAT. (G,H,I,J,L,O,F,B. ?=help) >

[0m[1m[32mUse pr day$W

[0m[1m[32m  MON  TUE  WED  THU  FRI  SAT  SUN$W

[0m[1m[32mUse pr hour$W

[0m[1m[32m0 0 0 0 0 1 1 1 1 1 2 2  Hour$W

[0m[1m[32m0 2 4 6 8 0 2 4 6 8 0 2$W

[0m[1m[32m$N active messages$W

#

[0m[1m[32m$0 Connects since $j$W 

[0m[1m[32mConnects$W  Average time pr connect  : $0min $1s$W

[0m[1m[32m  Average # of conn pr day : $0$W

[0m[1m[32m  Rush-hours               : At $1 and $0 o'clock.$W

[0m[1m[32mUsage (in percent)$W

[0m[1m[32m  BBS                      : $0 % $W

[0m[1m[32m  Server                   : $0 % $W

[0m[1m[32mServer details:$W

[0m[1m[32m  DOS                      : $0 % $W

[0m[1m[32m  Qth-Locator              : $0 % $W

[0m[1m[32m  Docs                     : $0 % $W

[0m[1m[32m  Connections-stat         : $0 % $W

[0m[1m[32m  User-data                : $0 % $W

[0m[1m[32m  Satellites               : $0 % $W

[0m[1m[32m$0 $1 $2 $3 $j $K = $4'$5"$W

#

# T_NOM: Modul USER-DATA

#

[0m[1m[33m$W($*) USER-DATA (I,N,R,F,B.  ?=help) >

#

# The next 2 lines are sent together for sysop, only the last one is sent for

# other users !

#

$W

[0m[1m[33m$W(R) Read information$W(I) Show list of users$W(N) Change own datas$W(F) Return to SERVER-menu.$W(B) Disconnect.$W$WFor detailed help, type ? (command).$W$WUSER-DATA (I,N,R,F,B.  ?=help) >

[0m[1m[33m$WCallsign    : $0$W 

#

[0m[1m[33mLast connect was $j at $K.$W

[0m[1m[33mHome-BBS    : $7$WName        : $1 $0$WAdress      : $2, $8 $3$WQth-Locator : $4.  Phone, home: $5, phone, work: $6$W

[0m[1m[33mLast-name                    :

[0m[1m[33mHouse-number and street-name :

[0m[1m[33mTown/city/village name?      :

[0m[1m[33mTelephone, home              :

[0m[1m[33mTelephone, work              :

[0m[1m[33mPlease enter your Qth-locator:

[0m[1m[33m$WTotal $0 callsigns$W

[0m[1m[31m*** Callsign $0 is unknown.$W

[0m[1m[31m*** Wrong Qth-locator.$W

#

# T_TRJ: Modul Satellites

#

[0m[1m[34m$W$W($*) SATELLITES (C,P,T,F,B.  ?=help) >

#

# The next 2 lines are sent together for sysop, only the last one is sent for

# other users !

#

[0m[1m[34m$W(M) Update parametres$W

$W(C) Descriptions$W(P) Show orbiting parametres$W(T) Calculate orbital data$W(F) Return to SERVER-menu$W(B) Disconnect$W$WFor detailed help, type ? (command).$WAfter you have used command C, P or T, send L for list !$W$WSATELLITES (C,P,T,F,B.  ?=help) >

[0m[1m[34m$WQTH-Locator : $0    Satellite $1$W

[0m[1m[34m--------------------------------------------------------------$W

[0m[1m[34m| Time  | Az. | El. | Dpl. | Dist. | Alti. | Lon | Lat | Ph. |$W

[0m[1m[34m|  UTC  | Deg | Deg | KHz  |  Km   |  Km   | Deg | Deg | 256 |$W

[0m[1m[34m--------------- $j-$y ------ Orbit #$0 ----------------$W

[0m[1m[34m| $0:$1 | $2 | $3 | $4 | $5 | $6 | $7 | $8 | $9 |$W

[0m[1m[34mStart-date for calculation (Day/month/year):

[0m[1m[34mStart-time for calculation (Hour:min)      :

[0m[1m[34m$WPlease wait...$W

[0m[1m[31m$WThere is no information about this satellite.$W

#

[0m[1m[34mUpdate from $j-$y.$W              

[0m[1m[34mSatellite name      :

[0m[1m[34mReference orbit     :

[0m[1m[34mReference year      :

[0m[1m[34mReference day       :

[0m[1m[34mMean anomaly        :

[0m[1m[34mArg. of perigee     :

[0m[1m[34mR.A.A.N.            :

[0m[1m[34mInclination         :

[0m[1m[34mEccentricity        :

[0m[1m[34mMean motion         :

[0m[1m[34mDerived mean motion :

[0m[1m[34mEstimated step      :

[0m[1m[34mDoppler frequency   :

[0m[1m[34m$WOrbiting parametres for $0$W

[0m[1m[34mOrbit number        : $0$W

[0m[1m[34mEpoch year          : $0$W

[0m[1m[34mEpoch day           : $0$W

[0m[1m[34mMean anomaly        : $0$W

[0m[1m[34mArg. of perigee     : $0$W

[0m[1m[34mR.A.A.N.            : $0$W

[0m[1m[34mInclination         : $0$W

[0m[1m[34mEccentricity        : $0$W

[0m[1m[34mMean motion         : $0$W

[0m[1m[34mDerived mean motion : $0$W

[0m[1m[34mEstimated step      : $0$W$W

[0m[1m[34m($0) $1

[0m[1m[34m(F) End$W

#

# T_QTH: Qth Locator - modul

#

[0m[1m[35m$W($*) QTH-LOCATOR (C,D,L,Q,F,B.  ?=help) >

#

# The next 2 lines are sent together for sysop, only the last one is sent for

# other users !

#

$W

[0m[1m[35m$W(Q) Qth -> Long. Lat.$W(L) Long. Lat. -> Qth$W(D) Dist. and Azimut$W(C) Distances$W(F) Return to server-menu$W(B) Disconnect$W$WFor detailed help, type ? (command).$W$WQTH-LOCATOR (C,D,L,Q,F,B.  ?=help) >

#######################################################################

# New in 5.15:  Quit with F or Q

[0m[1m[35m$WQth Locator (F,Q=Quit) :

[0m[1m[35mGeographical coordinates in the centre of the square :$W

[0m[1m[35mLongitude  : $0 degrees $1' $2 : $3 gr $2$W

[0m[1m[35mLatitude   : $0 degrees $1' $2 : $3 gr $2$W

[0m[1m[35m$WUse format$WIn degrees    : 1:45:00 (direction).$WIn gradians   : 1.5 (direction)$W(direction) shall be replaced by Nort, South, East or West.$W

[0m[1m[35m$WLongitude (East/West)  (F,Q=Quit) :

[0m[1m[35m$WLatitude (North/South) (F,Q=Quit) :

[0m[1m[35m$WQth Locator (F,Q=Quit) : $0$W

[0m[1m[35m$WFrom Qth Locator (F,Q=Quit) :

[0m[1m[35m$WTo   Qth Locator (F,Q=Quit) :

[0m[1m[35mAzimut   : $0 degr $1' : $2 gr$W

[0m[1m[35mDistance : $0 Km$W

[0m[1m[35m$WYour Qth Locator (F,Q=Quit) :

[0m[1m[35m$WTo Qth Locator   (F,Q=Quit) :

#######################################################################

[0m[1m[35mCalculation no $0 - Total distance : $1 Km$W

[0m[1m[35mCalculation finished.$W

#

# T_DOS: Module DOS

#

##############################################################################

# %d and %m new in 5.15b

[0m[1m[36m$W($*) [%d/%mkb]$W$u:$0>

##############################################################################

[0m[1m[31mDirectory $0 deleted.$W

[0m[1m[36mFile does not exist.$W

[0m[1m[36m$0 $1 $2 $3   $4 $5 $6 $7$W

[0m[1m[36mSending of file $f is cancelled.$W

[0m[1m[36mFile $f is saved ($0 bytes).$W

[0m[1m[36mSend file $f (end with Ctrl-Z).$W

[0m[1m[36m$0 bytes copied.$W

##############################################################################

# Added some explanation in 5.15b:

[0m[1m[36m$W$j $T  FBBDOS V$E$W$WFormat :$W(1)       = (1 connected station)$W[0/50kb] = [downloaded 0kb till now/max allowed 50kb] in this period$WC:\>      = drive and path (like in MSDOS)$W

##############################################################################

[0m[1m[36m$WAvailable commands :$W

[0m[1m[31mFile $f has been deleted.$W

[0m[1m[36m$0 bytes free.$W

#

# T_INF: Docs-module

#

[0m[1m[37m$W$* connected station(s)$WDOCUMENTATION$0 (Number,L,R,B,F.  ?=Help) > 

#

# The next 2 lines are sent together for sysop, only the last one is sent for

# other users !

#

[0m[1m[37m$W(D)       = For sysop:  Description.$W

[0m[1m[37m$W(L)       = List$W(number)  = Read doc number$W(R)       = Return to previous level$W(F)       = Return to Server-meny  $W(H H)     = More help$W(B)       = Disconnect$W$W($*) DOCS$0 (#,L,R,B,F.  ?=Help) >

[0m[1m[31mDoes not exist.$W

#

# T_GATE: Module gateway

#

[0m[1m[31mYou are now on channel $=, port $!. $g available ports.$WH = Help. Q = Quit.$W

[0m[1m[31mPort number (Q = Quit) :

[0m[1m[31mYou are now using channel $0 on that port.  Frequency: $1.$W  

[0m[1m[31mNo available channels on that port.$W

[0m[1m[31mCmd :

[0m[1m[31mConvers mode. Esc or > (return) for command mode.$W

[0m[1m[37m*** Error : You are already on that port !$W

[0m[1m[37m*** Error : Invalid port.$W

[0m[1m[31m*** Gateway is not available.$W

#

[0m[1m[31m$O: INVALID COMMAND $0. (C,D,J,K,H,M,P,Q.)$W

[0m[1m[31mSending $f...$W

[0m[1m[31mText capture opened in $f.$W

[0m[1m[31mText capture closed.$W

#

# T_YAP: Module YAPP

#

Ready to send $f with $0-protocole.$W    

Ready to receive $f with $0-protocole.$W  

Sorry, $0 is not allowed on this port.$W

Describe the file, max 40 characters :

$0 $1 $2 $3   $4$W

#

# T_CNF: Module CONFERENCE

#

[0m[33mYou are now in the conference (".H" = Help, ".Q" to quit).$W

[0m[1m[33m$Hz.  Stations in the conference :$W

[0m[1m[33mCallsign : $0, channel $1.$W

[0m[1m[31m$H.  $0 enters the conference.$W

[0m[1m[31mYou leave the conference.$W

[0m[1m[33m$H.  $0 leaves the conference.$W

[0m[1m[33m[$H - $0]$W

[0m[1m[31mNobody else in the conference.$W

[0m[1m[31m$H.  $0 : Retry count exceeded.$W

[0m[1m[31m$H.  $0 busy.$W

[0m[1m[31m$H.  $0 is not in the conference !$W

