#############################
# English Text ANSI COLOR   #
#   For F6FBB BBS (V5.15)   #
#    By KB4UAH 21/06/93     #
#############################
#
#########################
#  Please advise of any #
#  errors you may find, #
#  or suggestions for   #
#  improving the text.  #
#########################
#
#########################################
# PLEASE NOTE:                          #
# ~~~~~~~~~~~                           #
# Lines must NOT exceed 255 characters. #
# Line arrangement must not be changed. #
# Lines (except comment lines begining  #
# with #) must not be added or deleted. #
#                                       #
#########################################
#
#
# STARTUP LANGUAGE, RESPONSES, DATE FORMAT, COMPASS
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
English
[1;36mANSI COLOR TEXT use Procomm or Telix.$WBy KB4UAH 06/21/93$WOL: The language selected is : English$W
Yes
No
SunMonTueWedThuFriSat
JanFebMarAprMayJunJulAugSepOctNovDec
North
South
East
West
#
# T_MES (WELCOME MESSAGES)
# ~~~~~~~~~~~~~~~~~~~~~~~~
#
# BBS, EXPERT, NON-EXPERT
#
OK $I
[1;36m$WHello $I.
[1;36m$WHello $I,$WWelcome to $O.$WType ? <CR> for help.$W
#
# REGISTER NAME, QTH, HOME-BBS, ZIP-CODE
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
$WPlease enter your first name : N (firstname).
$WPlease enter your QRA Locator: NQ (locator).
$WPlease enter your Home-BBS   : NH (Home-BBS).
$WPlease enter your Zip-code   : NZ (Postcode).$W$W
#
# GUEST ENTRY MESSAGE
# ~~~~~~~~~~~~~~~~~~~
#
You only have limited access on this port.$W$W$=:$O>$W
#
# RESPONSE TO NON-BBS ON "BBS ONLY" PORT
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
Sorry, only BBS's are permitted on this port.$W
#
# CONNECTION MESSAGES
# ~~~~~~~~~~~~~~~~~~~
#
$WThis is your first connection to this mailbox.$W$O is located in $c, $?.$W
[1;31m$WThere's $0 new message(s) for you.$W
[1;35m$WThere's $0 message(s) that you have read, but not killed.$W
You have been connected $: - CPU time : $.[1;36m$W73 from $O.$W
#
# RESPONSE TO ! COMMAND
# ~~~~~~~~~~~~~~~~~~~~~
#
[1;36m$WMulticonnect Server BBS by F6FBB V$E$W$WAssigned channels:$W$% $W$N active messages - Last message $L - Last listed $Z.$WThere are new messages for:$W$Q$W$WYour Message Filter is $l.$WConnected time : $: - CPU time : $.$W
#
# T_QST (STANDARD QUESTIONS AND ANSWERS)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
[0;1;36m<CR> Continue <A>bort <C>ontinue no paging <N>ext Message..>
[1;32mMake changes (Y/N) ?
[1;36mThank you!$W
[5;35m$WAborted!$W
Create (Y/N) ?
[1;33m$WYour choice (L=List, F=Finish) :
[0;1;36m<CR> Continue <A>bort <R #> Read Message..>
#
# T_ERR (ERROR MESSAGES)
# ~~~~~~~~~~~~~~~~~~~~~~
#
[5;35m*** Error : You typed the wrong answer.$W
[5;35m*** Error : The command $0 is incorrect $I.$W
[5;35m*** Error : You forgot a space, or character after the command $I.$W
[5;35m*** Error : There are only numeric values allowed $I.$W
[5;35m*** Error : The text after the callsign is missing $I.$W
[5;35m*** Sorry : There is no help available for $0.$W
[5;35m*** Error : The Callsign of the other station is missing $I.$W
[5;35m*** Error : The Callsign is missing $I.$W
[5;35m*** Error : There is no file with that name $I.$W
[5;35m*** Error : The character $0 is not accepted here $I.$W
[5;35m*** Error : Message #$M does not exist $I.$W
[5;35m*** Error : The file $f does not exist $I.$W
[5;35m*** Error : You can't kill message #$M $I.$W
[5;35m*** Error : #$M does not exist $I.$W
[5;35m*** Error : That's an invalid port $I.$W
[5;35m*** Error : Try using the CD command $I.$W
[5;35m*** Error : The directory name is missing.$W
[5;35m*** Error : The directory is missing.$W
[5;35m*** Sorry : The directory name is too long $I.$W
[5;35m*** Sorry : No Match!$W
[5;35m*** Error : The file name is missing.$W
[5;35m*** Error : The "To" file name is missing.$W
[5;35m*** Error : That language is unknown $I.$W
[5;35m*** Error : It is impossible to modify $f.$W
[5;35m*** Error : The directory "$0" is unknown, or not empty.$W
[5;35m*** Error : Directory is missing $I.$W
[5;35m*** Error : I can't make a directory called "$0".$W
[5;35m*** Error : The path is missing $I.$W
[5;35m*** Error : The path is to long $I.$W
[5;35m*** Error : That path does not exist $I.$W
[5;35m*** Error : I Can't make a file called $f, sorry $I.$W
[1;35m*** Timed out!$W
#
# T_MBL (MAILBOX)
# ~~~~~~~~~~~~~~~
#
# EXPERT, GUEST, NON-EXPERT PROMPTS
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[0;1;36m$W$=:$O>$W
[0;1;36m$W$=:$O (B,KM,LM,O,RM,S,T,?) >$W
[0;1;36m$W$=:$O (A,B,C,D,F,G,I,J,K,L,LC,M,N,O,P,QTH,R,S,T,U,V,W,X,Y,Z,?) >$W
#
# GENERAL MESSAGES #1
# ~~~~~~~~~~~~~~~~~~~
#
[1;33mThere are no messages.$W
[1;31mThere are no new messages for you.$W
[1;35mEnter Subject (Maximum 30 characters):
[1;36mMessage, (end with /EX or Ctrl-Z):$W
[1;32mMessage #$M has been killed.$W
#
# RESPONSE TO V COMMAND
# ~~~~~~~~~~~~~~~~~~~~~
[1;36mSoftware by F6FBB (V$E). $N active messages - Last message is #$L.$W
#
# GENERAL MESSAGES #2
# ~~~~~~~~~~~~~~~~~~~
Enter your first name        :
[1;36mThank you $I.$W
Callsign  LastConnect #Cnct RPBSXLEMU Lg Name         Password     PRIV-dir.$W
$V is not available, you can leave a message in the mailbox.$W
[1;36mPlease wait while I call $V for you $I.$W
$V did not answer, you can leave a message in the mailbox.$W
Ok $I, $V is now at the keyboard:$W
$WExcuse me $I, $V would like to talk with you.$W
[1;37mYou are now in Expert mode.$W
[1;33mYou are now in Normal mode.$W
[1;31mYou are in Server mode. Type F <return> for BBS mode.$W
File $f has been copied as requested.$W
Message for $G has been cancelled (no title).$W
[1;35mOP: Paging Mode is now set to        : OFF$W
[1;34mOP: Paging Mode is now set to        : $p lines$W
The User is connected. Editing is not permitted.$W
$0 $1 $2 $3 $j $K = $4'$5
ON: Base Message number is set to    : $0$W
(B)id, (F)rom, (V)=@BBS, (T)o, T(I)tle, (S)tatus, T(Y)pe, (CR) finished >$W
$W(R)ead all, (P)aging, (B)BS, (S)ysop, e(X)pert, (L)ocal, (E)xclude, (M)odem,$W(U)ser list, lan(G)uage, (N)ame, pass(W)ord, pri(V)ate, (H)ome, (Z)Postcode,$W(CR)=end >$W
The callsign $0 is unknown to me, shall I create a file (Y/N) ?
$WDelete $0 Y/[N] ?
[1;32mAvailable languages are:$W
($0):$1
[1;34m$W            ====== End of message # $M ======$W$W
#
# RESPONSE TO $ (MESSAGE-#) OR FN (MESSAGE-#) COMMAND
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
Message #$0$W
#
# MESSAGE HEADER WHEN READING
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
[1;33m$WFrom        : $P$WTo          : $G$0$WType/status : $t$s$WDate/time   : %j %K$WBid         : $R$W
#
# MESSAGE HEADER WHEN LISTING
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
[1;32m$W  Message Choice - [$l]$WMsg #  TSL  Size To     @ BBS  From   Date   Time  Subject[1;31m$W====== ===  ==== ===== ======= ====== ====== ===== ===========================$W[1;36m
#
# LINE CONTENT WHEN LISTING
# ~~~~~~~~~~~~~~~~~~~~~~~~~
$M $t$s$r $n $G$0 $P %j %K $1$W
#
Message #   : $M$WTitle       : $S$W[1;36m
Bid (Mid)   : $R$W$W
Message forwarding to
$0-Routing to $v$W
#
# PROMPTS FOR REVERSE FORWARDING, AND STANDARD FORWARDING
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
F>$W
>$W
#
# MESSAGES ISSUED DURING FORWARDING
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NO - Wrong parameter.$W
N - BID$W
OK $W
*** Done$W
#
Size: $n$W
[1;32mI do not have forwarding set to $A. The SysOp will be informed.$W
The reply is addressed to $G.$W
OR: Unrestricted Access to all mail  : $0$W
OM: Show new messages at log-on      : $0$W
Please enter your Home BBS   :
Please enter your Postcode   :
HomeBBS: $0      Postcode: $1$W
Warning! No WP-Route known to $G$W
$W$0 held message(s)$W
$W(A)rchive,(K)ill,(L)ocal,(Q)uit,(R)ead,(V)erbose,(U)nhold, (CR) finished >$W
#
# T_TRT
# ~~~~~
#
*** Busy - Please wait.$W
*** Busy - Not possible to connect.$W
*** $0 is not connected.$W
$W$B*** Connected to $0 (End with Ctrl-Z).$W
*** Disconnected.$W
*** "Break" from $0 ***$W
*** End of "break" ***$W
"Break" for message from $0.$W
Interrupt request from $0. Code: $1$W
Stop-request accepted, no connectees presently on system.$W
Reset-request accepted, performing initialization.$W
Unknown command.$W
Interrupt request rejected.$W
[1;36mYou are in BBS mode. Type F <return> for Server mode.$W
#
# T_MEN (SERVER MENU)
# ~~~~~~~~~~~~~~~~~~~
#
[0;1;34m$WSERVER-MENU (C,D,N,Q,T,F,B,?) >
$W 
[0;1;35m$W(C) Connections-Stat.$W(D) Docs.$W(Q) Qth-Locator.$W(N) User-data.$W(T) Satellites.$W(F) Return to BBS mode.$W(B) Disconnect.[1;34m$W$WSERVER-MENU (C,D,N,Q,T,F,B,?) >
#
# T_STA (STATISTICS MODULE)
# ~~~~~~~~~~~~~~~~~~~~~~~~~
#
[0;1;34m$WCONNECTIONS-STAT. (G,H,I,J,L,O,F,B,?) >
$W
[0;1;35m$W(G) General$W(H) Use per hour$W(I) List callsigns$W(J) Use per day$W(L) Details$W(O) Percentages$W(F) Return to Server-menu$W(B) Disconnect[1;34m$W$WCONNECTIONS-STAT. (G,H,I,J,L,O,F,B,?) >
[1;36mUSE PER DAY$W
[1;37m  MON  TUE  WED  THU  FRI  SAT  SUN$W
[1;36mUSE PER HOUR$W
0 0 0 0 0 1 1 1 1 1 2 2  Hour$W
0 2 4 6 8 0 2 4 6 8 0 2$W
[1;36mINFORMATION$W[1;37m$N active messages$W
$0 Connections since $j$W
Connections$W  Average time per connection: $0min $1s$W
  Average # of conn per day  : $0$W
  Rush-hours                 : At $1:00hrs and $0:00hrs.$W
[1;36mUSAGE (in percent)$W
[1;37m  BBS                      : $0 % $W
  Server                   : $0 % $W
[1;36mSERVER DETAILS:$W
[1;37m  DOS                      : $0 % $W
  Qth-Locator              : $0 % $W
  Docs                     : $0 % $W
  Connections-stat         : $0 % $W
  User-data                : $0 % $W
  Satellites               : $0 % $W
$0 $1 $2 $3 $j $K = $4'$5"$W
#
# T_NOM (USER-DATA MODULE)
# ~~~~~~~~~~~~~~~~~~~~~~~~
#
[0;1;34m$WUSER-DATA (I,N,R,F,B,?) >
$W
[0;1;35m$W(R) Read information$W(I) Show list of callsigns$W(N) Change name and address$W(F) Return to Server-menu.$W(B) Disconnect.[1;34m$W$WUSER-DATA (I,N,R,F,B,?) >
[0;1;31m$WCallsign: $0$W
$WLast connection was $j at $K.$W
Name       : $1 $0$WAddress    : $2, $3$WLocator    : $4$WPhone-home : $5$WPhone-work : $6$WHome-BBS   : $7$W
Last-name                    :
House-number,street,Zip-Code :
City and State               :
Telephone, home              :
Telephone, work              :
Qra-locator                  :
$WTotal $0 callsigns$W
[1;35m*** Callsign $0 is unknown.$W
[1;35m*** Wrong Qra-locator (format is: two letters, two numbers, two letters).$W
#
# T_TRJ (SATELLITE MODULE)
# ~~~~~~~~~~~~~~~~~~~~~~~~
#
[0;1;34m$WSATELLITES (C,P,T,F,B,?) >
$W(M) Update parameters$W
[0;1;35m$W(C) Description$W(P) Show orbiting parameters$W(T) Calculate orbital data$W(F) Return to Server-menu$W(B) Disconnect[1;34m$W$WSATELLITES (C,P,T,F,B,?) >
$WQTH-Locator : $0    Satellite $1$W
[0;1;31mͻ$W
[0;1;33m Time   Az.  El.  Dpl.  Dist.  Alti.  Lon  Lat  Ph. $W
[0;1;33m  UTC   Deg  Deg  KHz    Km     Km    Deg  Deg  256 $W
[0;1;31m $j$y  Orbit #$0 Ķ$W[0;1;36m
 $0:$1  $2  $3  $4  $5  $6  $7  $8  $9 $W
[0;1;34mStart-date for calculation (DD/MM/YY):
[0;1;32mStart-time for calculation (Hour:min):
$WPlease wait...$W
$WThere is no information about this satellite.$W
#
Update from $j-$y.$W
Satellite name      :
Reference orbit     :
Reference year      :
Reference day       :
Mean anomaly        :
Arg. of perigee     :
R.A.A.N.            :
Inclination         :
Eccentricity        :
Mean motion         :
Derived mean motion :
Estimated step      :
Doppler frequency   :
$WOrbiting parameters for $0$W
Orbit number        : $0$W
Epoch year          : $0$W
Epoch day           : $0$W
Mean anomaly        : $0$W
Arg. of perigee     : $0$W
R.A.A.N.            : $0$W
Inclination         : $0$W
Eccentricity        : $0$W
Mean motion         : $0$W
Derived mean motion : $0$W
Estimated step      : $0$W$W
($0) $1
(F) Finish$W
#
# T_QTH (QTH LOCATOR MODULE)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~
#
[0;1;34m$WQTH-LOCATOR (C,D,L,Q,F,B,?) >
$W
[0;1;35m$W(Q) Qra -> Long/Lat$W(L) Long/Lat -> Qra$W(D) Dist. and Azimuth$W(C) Distances$W(F) Return to Server-menu$W(B) Disconnect[1;34m$W$WQTH-LOCATOR (C,D,L,Q,F,B,?) >
$WPlease enter your Qra Locator (Q to Quit) :$W
[1;32mGeographical coordinates in the centre of the square :$W
Longitude  : $0 degrees $1' $2  : $3 gradians $2$W
Latitude   : $0 degrees $1' $2  : $3 gradians $2$W
$WUse format$WIn degrees  = 1:45:00 [direction].$WIn gradians = 1.5 [direction]$W[direction] shall be replaced by North, South, East or West.$W
$WLongitude (East/West)  :
$WLatitude (North/South) :
$WQra Locator : $0$W
$WFrom Qra Locator :
To   Qra Locator :
Azimuth  : $0 degrees $1' : $2 gradians$W
Distance : $0 Km$W
$WYour Qra Locator :
$WTo Qra Locator (F = Finish) :
Calculation number $0 - Total distance : $1 Km$W
Calculation finished.$W
#
# T_DOS (DOS MODULE)
# ~~~~~~~~~~~~~~~~~~
#
[0;1;32m$W$u:$0>
Directory $0 deleted.$W
That file does not exist.$W
$0 $1 $2 $3   $4 $5 $6 $7$W
Sending of file $f cancelled.$W
File $f has been saved ($0 bytes).$W
Send file $f (end with Ctrl-Z).$W
$0 bytes copied.$W
[0;1;36m$W$j $T FBBDOS V$E$W
$WAvailable commands :$W
File $f has been deleted.$W
$W$0 bytes free.
#
# T_INF (DOCUMENTS MODULE)
# ~~~~~~~~~~~~~~~~~~~~~~~~
#
[0;1;34m$WDOCUMENTS$0 (#,L,R,F,B,?) >
$W(D) Describe file.$W
[0;1;35m$W(number) Read doc number$W(L) List$W(R) Return to previous level$W(F) Return to SERVER-menu$W(B) Disconnect[1;34m$WDOCUMENTS$0 (#,L,F,R,B,?) >
That entry does not exist.$W
#
# T_GATE (GATEWAY MODULE)
# ~~~~~~~~~~~~~~~~~~~~~~~
[1;33mYou are now on channel $=, port $!. $g available port(s).$WH = Help. Q = Quit.$W
[1;36mEnter port number (Q = Quit) :
You are now using channel $0 on the port allocated for: $1.$W
Sorry, there are no channels available.$W
[1;36mCmd :
[1;33mConverse mode. Esc or > (return) for command mode.$W
*** Error : You are already on that port!$W
*** Error : Invalid port.$W
*** Gateway is not available $I.$W
[0;1;36m$O: $0 is an invalid command. (C,D,J,K,H,M,P,Q,?) >$W
Sending $f...$W
Text capture has now been opened in $f.$W
Text capture has now been closed.$W
#
# T_YAP (YAPP MODULE)
# ~~~~~~~~~~~~~~~~~~~
#
[1;33mReady to send $f with $0 protocol.$W
[1;36mReady to receive $f with $0 protocol.$W
[1;33mSorry, $0 is not allowed.$W
[1;36mDescribe the file, max 40 characters :
$0 $1 $2 $3   $4$W
#
# T_CNF (CONFERENCE MODULE)
# ~~~~~~~~~~~~~~~~~~~~~~~~~
#
[1;33mYou have entered the conference (Help = ".?").$W
It is $H. Current stations in the conference :$W
Callsign : $0, channel $1.$W
$H $0 has entered the conference.$W
[1;33mYou have left the conference.$W
$H $0 has left the conference.$W
$W[$H - $0]$W
[1;33mThere is nobody else in the conference.$W
$H $0 : Retry count exceeded.$W
$H $0 is busy at the moment.$W
$H $0 is not in the conference!$W
#
# **END OF FILE**
#     (phew!)
