
callserver2 <subcommand>

     The 'callserver2' command configures the CDROM callsign server.
Depending on how Jnos was compiled, one of Buckmaster, Buckmaster
International, Sam, or QRZ! CDROMs is supported.


    callserver2 hostname [<hostid>]

     Sets or displays the <hostid> of the callsign server.  A telnet
     connection will then be attempted to <hostid> at port 1235, when
     the 'callbook' command is used to request a lookup.


    callserver2 database [<path>]

     Sets or displays the path to the Buckmaster CDROM callsign database
     file.


    callserver2 tsrirq [<software_irq_in_decimal>]

     Sets or displays the software IRQ used to communicate with the
     Buckmaster driver called bucktsr.exe.  This program must be loaded
     before Jnos, and it displays the IRQ it will use as it loads.  The
     irq is specified in decimal (since the /I option to bucktsr takes a
     decimal value when specifying an alternate to the default value 102).
     This subcommand is available when Jnos is compiled with BUCKTSR
     defined.
