# $NetBSD: GENERIC,v 1.52.2.3 2004/07/15 20:18:47 he Exp $
#
# GENERIC machine description file
# 
# This machine description file is used to generate the default NetBSD
# kernel.  The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page.  For further information about kernel options
# for this architecture, see the options(4) man page.  For an explanation
# of each device driver in this file see the section 4 man page for the
# device.

include 	"arch/mmeye/conf/std.mmeye"

options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

#ident 		"GENERIC-$Revision: 1.1.1.5 $"

maxusers	16		# estimated number of users

# CPU support
options		SH3
options 	SH7708R		# 100MHz
options 	MMEYE
options 	MMEYE_NEW_INT
#options 	MMEYE_NO_CACHE
options 	PCLOCK=33330000		# 33.33MHz
options 	INITTODR_ALWAYS_USE_RTC

# Standard system options
#options 	INSECURE	# disable kernel security levels

options 	HZ=50		# clock interrupt generates every 1/HZ sec
options 	NTP		# NTP phase/frequency locked loop
options 	KTRACE		# system call tracing via ktrace(1)
options 	SYSTRACE	# system call vetting via systrace(1)

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
#options 	SEMMNI=10	# number of semaphore identifiers
#options 	SEMMNS=60	# number of semaphores in system
#options 	SEMUME=10	# max number of undo entries per process
#options 	SEMMNU=30	# number of undo structures in system
options 	SYSVSHM		# System V-like memory sharing
#options 	SHMMAXPGS=1024	# 1024 pages is the default
options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support

#options 	LKM		# loadable kernel modules

options 	USERCONF	# userconf(4) support
#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Diagnostic/debugging support options
#options 	DIAGNOSTIC	# cheap kernel consistency checks
#options 	DEBUG		# expensive debugging checks/support
#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
#options 	DDB		# in-kernel debugger
#options 	SYSCALL_DEBUG
#makeoptions	DEBUG="-g"	# compile full symbol table

# Compatibility options
options 	COMPAT_14	# NetBSD 1.4,
options 	COMPAT_43	# and 4.3BSD
#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
options 	BSDDISKLABEL_EI	# endian independent disklabel support
options 	COMPAT_MMEYE_OLDLABEL	# old mmeye's disklabel support

# Executable format options
options 	EXEC_COFF	# COFF executables
options 	EXEC_ELF32	# 32-bit ELF executables

# File systems
file-system 	FFS		# UFS
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
file-system 	NULLFS		# loopback file system
file-system 	OVERLAY		# overlay file system
file-system 	PORTAL		# portal filesystem (still experimental)
file-system 	PROCFS		# /proc
file-system 	UMAPFS		# NULLFS + uid and gid remapping
file-system 	UNION		# union file system
file-system	CODA		# Coda File System; also needs vcoda (below)

# File system options
#options 	QUOTA		# UFS quotas
#options 	FFS_EI		# FFS Endian Independant support
options 	SOFTDEP		# FFS soft updates support.
options 	NFSSERVER	# Network File System server
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

# Networking options
#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	IPFILTER_LOG	# ipmon(8) log support
#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

#options 	ALTQ		# Manipulate network interfaces' output queues
#options 	ALTQ_BLUE	# Stochastic Fair Blue
#options 	ALTQ_CBQ	# Class-Based Queueing
#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
#options 	ALTQ_FIFOQ	# First-In First-Out Queue
#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
#options 	ALTQ_LOCALQ	# Local queueing discipline
#options 	ALTQ_PRIQ	# Priority Queueing
#options 	ALTQ_RED	# Random Early Detection
#options 	ALTQ_RIO	# RED with IN/OUT
#options 	ALTQ_WFQ	# Weighted Fair Queueing

options 	NFS_BOOT_DHCP	# Support DHCP NFS root

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options 	PCIVERBOSE	# verbose PCI device autoconfig messages
#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
options 	SCSIVERBOSE	# human readable SCSI error messages
#options 	USBVERBOSE	# verbose USB device autoconfig messages

# Kernel root file system and dump configuration.
config		netbsd	root on ? type ?

#
# Device configuration
#

mainbus0 at root

shb*	at mainbus?

com0	at mainbus?
com1	at mainbus?

# SH PCMCIA controllers
mmeyepcmcia0	at mainbus?
mmeyepcmcia1	at mainbus?

# PCMCIA bus support
pcmcia*	at mmeyepcmcia? controller ? socket ?

com*	at pcmcia? function ?		# Modems and serial cards
wdc*	at pcmcia? function ?
atabus* at ata?
wd*	at atabus? drive ?			# the drives themselves

ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
mbe*	at pcmcia? function ?		# MB8696x based Ethernet
ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
sm*	at pcmcia? function ?		# Megahertz Ethernet

# Pseudo-Devices

pseudo-device	ccd		4	# concatenated/striped disk devices
#pseudo-device	cgd		4	# cryptographic disk devices
#pseudo-device	raid		8	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
# options	RF_INCLUDE_EVENODD=1
# options	RF_INCLUDE_RAID5_RS=1
# options	RF_INCLUDE_PARITYLOGGING=1
# options	RF_INCLUDE_CHAINDECLUSTER=1
# options	RF_INCLUDE_INTERDECLUSTER=1
# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
pseudo-device	vnd		4	# disk-like interface to files
pseudo-device	bpfilter	8	# Berkeley packet filter
pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop			# network loopback
pseudo-device	ppp		2	# Point-to-Point Protocol
pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
pseudo-device	sl		2	# Serial Line IP
pseudo-device	strip		2	# Starmode Radio IP (Metricom)
pseudo-device	tun		2	# network tunneling over tty
pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	vlan			# IEEE 802.1q encapsulation
pseudo-device	bridge			# simple inter-network bridging
#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
pseudo-device	pty			# pseudo-terminals
pseudo-device	rnd			# /dev/random and in-kernel generator
pseudo-device	vcoda		4	# coda minicache <-> venus comm.
#pseudo-device	md		1	# memory disk device (ramdisk)
pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	ksyms			# /dev/ksyms

# Enable the hooks used for initializing the root memory-disk.
#options 	MEMORY_DISK_HOOKS
#options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
#options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
#options 	MEMORY_DISK_ROOT_SIZE=3074	# size of memory disk, in blocks
