# Generated automatically from Makefile.in by configure.
# Makefile.in for dvidvi  -- S Rahtz s.rahtz@elsevier.co.uk
version = 1.0
# paths.make -- installation directories.
#
# The compile-time paths are defined in kpathsea/paths.h, which is built
# from kpathsea/texmf.in and these definitions.  See kpathsea/INSTALL
# for how the various path-related files are used and created.

# Do not change prefix and exec_prefix in Makefile.in!
# configure doesn't propagate the change to the other Makefiles.
# Instead, give the -prefix/-exec-prefix options to configure.
# (See kpathsea/INSTALL for more details.) This is arguably
# a bug, but it's not likely to change soon.
prefix = c:/usr/local
exec_prefix = ${prefix}

# Architecture-dependent executables.
bindir = ${exec_prefix}/bin

# Architecture-independent executables.
scriptdir = $(bindir)

# Architecture-dependent files, such as lib*.a files.
libdir = ${exec_prefix}/lib

# Architecture-independent files.
datadir = ${prefix}/share

# Header files.
includedir = ${prefix}/include

# GNU .info* files.
infodir = ${prefix}/info

# Unix man pages.
manext = 1
mandir = ${prefix}/man/man$(manext)

# TeX system-specific directories. Not all of the following are relevant
# for all programs, but it seems cleaner to collect everything in one place.

# The default paths are now in kpathsea/texmf.in. Passing all the
# paths to sub-makes can make the arg list too long on system V.
# Note that if you make changes below, you will have to make the
# corresponding changes to texmf.in or texmf.cnf yourself.

# The root of the main tree.
texmf = c:/usr/local/share/texmf-dist

# The directory used by varfonts.
vartexfonts = c:/var/tex/fonts

# Regular input files.
texinputdir = $(texmf)/tex
mfinputdir = $(texmf)/metafont
mpinputdir = $(texmf)/metapost
mftinputdir = $(texmf)/mft

# dvips's epsf.tex, rotate.tex, etc. get installed here;
# ditto for dvilj's fonts support.
dvips_plain_macrodir = $(texinputdir)/plain/dvips
dvilj_latex2e_macrodir = $(texinputdir)/latex/dvilj

# mktex.cnf, texmf.cnf, etc.
web2cdir = $(texmf)/web2c

# The top-level font directory.
fontdir = $(texmf)/fonts

# Memory dumps (.fmt/.base/.mem).
fmtdir = $(web2cdir)
basedir = $(fmtdir)
memdir = $(fmtdir)

# Pool files.
texpooldir = $(web2cdir)
mfpooldir = $(texpooldir)
mppooldir = $(texpooldir)

# Where the .map files from fontname are installed.
fontnamedir = $(texmf)/fontname

# For dvips configuration files, psfonts.map, etc.
dvipsdir = $(texmf)/dvips

# For dvips .pro files, gsftopk's render.ps, etc.
psheaderdir = $(dvipsdir)

# If a font can't be found close enough to its stated size, we look for
# each of these sizes in the order given.  This colon-separated list is
# overridden by the envvar TEXSIZES, and by a program-specific variable
# (e.g., XDVISIZES), and perhaps by a config file (e.g., in dvips).
# This list must be sorted in ascending order.
default_texsizes = 300:600

# End of paths.make.
# common.make -- used by all Makefiles.
SHELL = sh

top_srcdir = .
srcdir = .

CC = cl

YDEFS = -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_SECURE_NO_DEPRECATE \
-D_CRT_OBSOLETE_NO_DEPRECATE -D_SECURE_SCL=0 -DASCIIPTEX=1

CFLAGS = -nologo -O2 -MD -DWIN32=1 -DKPATHSEA=1 $(YDEFS) $(XCFLAGS)
CPPFLAGS =  $(XCPPFLAGS)
DEFS = -DHAVE_CONFIG_H $(XDEFS)

# Kpathsea needs this for compiling, programs need it for linking.
LIBTOOL =

# You can change [X]CPPFLAGS, [X]CFLAGS, or [X]DEFS, but
# please don't change ALL_CPPFLAGS or ALL_CFLAGS.
# prog_cflags is set by subdirectories of web2c.
ALL_CPPFLAGS = $(DEFS) -I. -I$(srcdir) $(prog_cflags) \
  -I$(kpathsea_parent) -I$(kpathsea_srcdir_parent) $(CPPFLAGS)
ALL_CFLAGS = $(ALL_CPPFLAGS) $(CFLAGS) -c
compile = $(CC) $(ALL_CFLAGS)

.SUFFIXES: .c .obj # in case the suffix list has been cleared, e.g., by web2c
.c.obj:
	$(compile) $<

# Installation.
INSTALL = cp
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = $(INSTALL_PROGRAM)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_LIBTOOL_LIBS = INSTALL_DATA='$(INSTALL_DATA)' $(LIBTOOL) install-lib
INSTALL_LIBTOOL_PROG = INSTALL_PROGRAM='$(INSTALL_PROGRAM)' $(LIBTOOL) install-prog

# Creating (symbolic) links.
LN = ln

# We use these for many things.
kpathsea_parent = ..
kpathsea_dir = $(kpathsea_parent)/kpathsea
kpathsea_srcdir_parent = $(top_srcdir)/..
kpathsea_srcdir = $(kpathsea_srcdir_parent)/kpathsea
kpathsea = $(kpathsea_dir)/kpathsealib.lib

#M#ifeq ($(CC), gcc)
#M#XDEFS = -D__USE_FIXED_PROTOTYPES__ -Wall -Wpointer-arith $(warn_more)
#M#CFLAGS = -pipe -g $(XCFLAGS)
#M#endif
# End of common.make.
# programs.make -- used by Makefiles for executables only.

# Don't include $(CFLAGS), since ld -g under Linux forces
# static libraries, e.g., libc.a and libX*.a.
LDFLAGS =  $(XLDFLAGS)

# proglib is for web2c; 
# XLOADLIBES is for the installer.
LIBS = ../kpathsea/kpathsealib.lib
LOADLIBES = $(proglib) $(LIBS) $(XLOADLIBES)

# May as well separate linking from compiling, just in case.
CCLD = $(CC)
link_command = $(CCLD) -Fe$@ $(LDFLAGS) 

# When we link with Kpathsea, have to take account that it might be a
# shared library, etc.
kpathsea_link = $(link_command)
# End of programs.make.

prog_cflags = -DNeedFunctionPrototypes -DHAVE_CONFIG_H \
	      -I$(kpathsea_dir) -I$(kpathsea_srcdir)
# We don't use Kpathsea, so don't overload fopen and stuff
DEFS = -DNO_DEBUG

program = dvidvi.exe
objects = dvidvi.obj

programs = $(program)

default: $(program)
all: $(program)

$(program): $(objects)
	cl -Fe$@ $(objects) setargv.obj $(LOADLIBES)

BINS=dvidvi.exe
DOCS=dvidvi.pdf
install: $(BINS)
	cp -p $(BINS) c:/usr/local/txdir/w32tex/bin/
	cp -p $(DOCS) c:/usr/local/txdir/w32tex/share/texmf-dist/doc/dvitools/base/
	cp -p $(BINS) c:/usr/work/edrive/wk/dist/DVITOOLS/bin/
	cp -p $(DOCS) c:/usr/work/edrive/wk/dist/DVITOOLS/share/texmf-dist/doc/dvitools/base/

# This rule isn't used for the top-level Makefile, but it doesn't hurt.
# We don't depend on config.status because configure always rewrites
# config.status, even when it doesn't change. Thus it might be newer
# than c-auto.h when we don't need to remake the latter.
c-auto.h: stamp-auto
stamp-auto: $(srcdir)/c-auto.in
	$(SHELL) config.status
	date >stamp-auto

info dvi check:

# clean.make -- cleaning.
clean:
	rm *.exe *.obj *~

distclean:: extraclean clean
	rm -f Makefile
	rm -f config.status config.log config.cache c-auto.h
	rm -f stamp-auto stamp-tangle stamp-otangle

# Although we can remake configure and c-auto.in, we don't remove
# them, since many people may lack Autoconf.  Use configclean for that.
maintainer-clean:: distclean
	rm -f *.info*

extraclean::
	rm -f *.aux *.bak *.bbl *.blg *.dvi *.log *.pl *.tfm *.vf *.vpl
	rm -f *.*pk *.*gf *.mpx *.i *.s *~ *.orig  *.rej *\#*
	rm -f CONTENTS.tex a.out core mfput.* texput.* mpout.*

configclean:
	rm -f configure c-auto.in c-auto.h stamp-*
# End of clean.make.

TAGS: *.c *.h
	pwd | grep kpathsea >/dev/null && append=../kpathsea/TAGS; \
	  etags $$append *.[ch]

# Prevent GNU make 3.[59,63) from overflowing arg limit on system V.
.NOEXPORT:

# End of rdepend.make.
dvidvi.obj: dvidvi.c 
